United Kingdom

Nonlinear nanophotonic technologies can enable an unprecedented ability to connect regions of the optical spectrum together. In this talk, I will discuss our laboratory’s efforts in developing nonlinear photonic resonators in the silicon nitride platform for both quantum and classical photonic links. I will review the basic design and engineering principles behind these devices, and discuss their application in quantum frequency conversion of single photons, visible-telecom entangled photon pair generation, the generation of visible laser light from near-infrared pump sources, and the use of nonlinear resonators in optical atomic clocks.

Bristol Quantum Information Technologies Workshop

Connecting widely separated optical frequencies using chip-integrated nonlinear microresonators

nonlinear optics

quantum photonics

integrated photonics

**BQIT is a three day annual workshop** aimed at enabling leading UK and international academics and industrial partners to come together; to explore and discuss future ambitions and challenges in the field of **Quantum Information Technologies.** Since our conception in 2014 we have had 230 speakers and panellists who have presented their work and opinions on a range of topics, from quantum theory to innovation in industry.


### Welcome Message
The BQIT:21 team welcomes you to the eighth Bristol Quantum Information Technologies workshop! 

Last year was the first time in our workshop's history that we had gone fully virtual. The global circumstances that continue to impact us all professionally and personally have forced BQIT once again to be delivered as an all-virtual workshop for 2021. The access this creates to colleagues across the world who would otherwise be unable to join us, as well as being able to make the workshop free for all attendees due to the lower costs involved in delivering an online workshop, are just a couple of the extraordinary benefits of meeting online. This also means that we can welcome three times as many attendees to BQIT than previous years.   

We take this opportunity to thank each of our speakers and poster presenters for contributing their technical content, this year's sponsors, whose support this year enabled BQIT:21 to be free to all attendees, and to all of our attendees for joining us online this year. We recognise the extra energy required to stay connected and motivated during these difficult times, and are hugely encouraged to see so many of you willing to continue to connect with us on an online platform. 

It is our hope that you have a productive and enjoyable time while you engage and interact with BQIT:21, and to everyone that has helped take BQIT:21 online, thank you! 

**The BQIT board and organisation team **


![](https://assets.underline.io/uploads/markdown_image/1/image/a12e0c1ad3410144cb48557690e4ecaf.png)
### This year's workshop agenda is available here: [Virtual BQIT:21](https://drive.google.com/file/d/1QwsSM0ztnxC_lgUKf3TbO3GvnI44AQkY/view?usp=sharing)
For further information, please contact us at: **bqit-admin@bristol.ac.uk**

![](https://assets.underline.io/uploads/markdown_image/1/image/a12e0c1ad3410144cb48557690e4ecaf.png)

technical paper

To investigate the fundamental nature of matter and its interactions, particles are accelerated to very high energies and collided within detectors, producing a multitude of other particles that are scattered in all directions. These particles leave signals of their passage while transversing the detector. The problem of track reconstruction is to recover the original trajectories from these signals. This represents a very demanding data analysis problem, and it will become even more so as the luminosity of the next generation accelerators keeps increasing.
Approaches to track reconstruction based on quantum information technologies have recently been put forward. In order to access the potential for a quantum speedup for this problem, we start by elaborating a computational complexity analysis of a standard tracking algorithm, the Combinatorial Track Finder. First, we find that it is possible to improve the classical complexity of the original algorithm.
We further show that we can use quantum search algorithms to reach a lower quantum computational complexity. To the best of our knowledge, this is the first computational complexity-level demonstration of a quantum advantage for a state-of-the-art track reconstruction method.
Work developed in collaboration with A.Ambainis, P.Bargassa, M.Dimitrijevs, A.Glos, M.Kālis, A.Kumar, A.Locāns, Y.Omar, S.Pratapsi, G.Quinta, A.Rivošs, J.Seixas.

Investigating Quantum Speedup for Track Reconstruction: Classical and Quantum Computational Complexity Analysis

Time-correlated single-photon counting (TCSPC) has been established as the preferred detection approach for high performance lidar and depth profiling due to its excellent surface to surface resolution and high optical sensitivity. 
This presentation will show the results of laboratory-based experiments obtained using different optical transceiver configurations. Particular attention will be given to underwater depth imaging using an individual commercially available silicon single photon avalanche diode (Si-SPAD) detectors, and prototypes of Si-SPAD detector arrays fabricated in complementary metal-oxide semiconductor (CMOS) or in custom fabrication technology. 
Depth and intensity profiles of stationary and moving targets were obtained under several underwater scattering conditions. The spatial resolution of each system was investigated in order to provide an estimation of the image degradation as the level of scattering increased. Data were analyzed using a pixel wise cross correlation approach, however additional bespoke image processing approaches will be discussed.

Underwater single-photon depth imaging

Integrated quantum photonics is a promising avenue for scaling up quantum optics beyond the proof of principle demonstrations. Such a future requires on-chip reconfigurable photonics where the integration with single-photon detectors remains a significant challenge. Heat as a standard method to tune photonic circuits makes superconducting detectors challenging. This work shows the cointegration of microelectromechanical reconfiguration with on-chip superconducting single-photon detectors (SSPD). As a demonstration of principle, we perform high-extinction routing, high-dynamic-range single-photon detection and power stabilization. This platform allows for heat-load free reconfiguration and all-integrated quantum optics experiments.


Reconfigurable photonics with on-chip single-photon detectors

Quantum computing machines have now entered a regime where tasks that were intractable on classical hardware can be solved. However, computational errors in such devices are still prohibitive for scaling to hundreds of good quality qubits.
In photonics, towards the achievement of a scalable platform for fault-tolerant universal quantum computing the reconfigurable generation of large entangled states is needed. These states can provide a flexible architecture which can naturally embed error-correction and be therefore useful for real applications in error-full scenarios.
Here we propose and experimentally demonstrate a novel integrated silicon photonic architecture that both entangles multiple photons and encodes multiple physical qubits on individual photons to produce error-correctable logical qubits. We realise reprogrammable entangled states for measurement-based quantum computing and compare a wide range of quantum information processing tasks with and without error correction. Moreover, we show the effectiveness of error
correction codes in quantum applications, such as the quantum phase estimation protocol, observing a significant success rate increase when running algorithms with error correction. We do it on an integrated silicon photonic platform which provides, fast-reconfigurable, high-precision, compact and mass-manufacturable circuitry, able to process tens of qubits. 
Our work represents a record for number of reconfigurable on-chip generated photonic qubits. Our results show how quantum error correcting schemes can provide advantages not only for faulttolerant machines, but also for near-term applications on pre-fault-tolerant devicesimplemented with resource-efficient photonic architectures that can already dramatically improve the performance of
quantum algorithms.

Error-protected measurement-based quantum computing on an eight-qubit silicon photonics processor

Rydberg atoms are highly excited atoms with exaggerated properties. In recent years, Rydberg atoms have emerged as a promising platform for numerous quantum technologies, ranging from quantum computation and simulation, single photon sources, RF communications and SI-traceable standards for electric fields. In this talk, I will explain how the properties of Rydberg atoms make them advantageous for such applications and I will present the results from two recent experiments at Durham. (1) High speed terahertz imaging in thermal atoms that achieves frame rates that are orders of magnitude faster than other terahertz sensors. (2) Collectively encoded qubits in cold-atom ensembles that demonstrate coherence properties that are robust to atom loss and electric field noise. 
(1) L. A. Downes et al. Physical Review X. 10, 011027 (2020) 
(2) N. L. R. Spong et al. arXiv:2010.11794

Rydberg Quantum Technologies

Honeywell Quantum Solutions launched its first commercial trapped-ion quantum computer in 2020, designed around the quantum charge-coupled device (QCCD) architecture. By applying fast transport operations to reorder and position ion qubits across multiple trapping zones simultaneously on the device, the QCCD architecture creates a fully-connected, high fidelity, and scalable quantum computer. These systems offer the unique capability of performing conditional quantum operations dependent on mid-circuit measurement outcomes, and qubits can be re-used in the same circuit after measurements. This feature allows users to perform efficient quantum simulations and execute repeated cycles of quantum error correction. Recently, the 10-qubit System Model H1 became the first quantum computer to pass the quantum volume 512 benchmark, the largest quantum volume ever measured on a commercial quantum computer. Future generation systems will incorporate new technologies such as 2D trap architectures and integrated photonics, in order to scale the number of physical qubits and further increase system performance.

High Performance Commercial Trapped Ion Quantum Computers

In this presentation, I will highlight our recent progress on developing AlGaAs-on-insulator (AlGaAsOI) integrated photonic devices for ultra-efficient quantum light generation, manipulation, and detection. AlGaAsOI boasts several advantages for integrated quantum photonics, including the brightest chip-scale entangled-photon pair sources, negligible two-photon absorption in the telecommunications band, low-loss reconfigurable interferometers with high extinction, high-efficiency and low-noise waveguide-integrated single-photon detectors, and prospects for low VL electro-optic modulators. Combined, these components offer exciting prospects for scalable, all-on-chip quantum photonic computing. I will also present our recent work on the integration of III-V gain with silicon-on-insulator entangled-pair sources for turn-key quantum light generation.

Heterogeneous III-V/Silicon Quantum Photonics

On-chip integration of single-photon detectors and reconfigurable optical circuits is a crucial step toward a fully scalable approach to quantum photonic technologies. By confining light inside lithographically patterned waveguides, single-photons can be actively routed and interfered in miniaturized reconfigurable optical networks, and their state can be read out with on-chip detectors. Integration of these two key elements on a common platform enhances the scalability of quantum photonic devices by minimizing their footprint and eliminating the need of lossy interconnects between separated optical systems. I will present recent progress on realizing cryo-compatible reconfigurable photonic circuits using hybrid integration. Our design is based on superconducting nanowire detectors for measuring single photon events combined with either electro-optomechanical or electro-optical phase shifters embedded in on-chip interferometers. These concepts enable the realization of programmable photonic circuits that feature low dissipation loss.

Premium content

Downloads

Next from Bristol Quantum Information Technologies Workshop

Investigating Quantum Speedup for Track Reconstruction: Classical and Quantum Computational Complexity Analysis

Similar lecture

Heterogeneous III-V/Silicon Quantum Photonics