China

Stimulated Raman adiabatic passage (STIRAP) is one of the most successful quantum control methods for coherent population transfer between two energy levels of a quantum system. A major advantage of STIRAP is its robustness against moderate variations of experimental parameters, while a drawback is that adiabatic transfer requires long times, leading to reduced efficiency when undesirable interactions with the environment are present leading to dephasing and dissipation. The efficiency of STIRAP can be increased when it is combined with shortcuts to adiabaticity techniques. One successful protocol that can be implemented is the superadiabatic STIRAP (SA-STIRAP), where the prototype Λ-type three-level system is driven by three laser pulses, forming a closed-loop configuration [1]. In this work we assess the efficiency of STIRAP and SA-STIRAP, in the presence of noise and dissipation. For the dissipation, we use the typical decay from the excited state, while for noise we use classical Ornstein-Ulhenbeck noise processes with exponential correlation functions leading to dephasing [2]. The performance of the two control protocols are compared for different system parameters.
1. L. Giannelli and E. Arimondo, Phys. Rev. A 89, 033419 (2014).
2. K. Blekos, D. Stefanatos, and E. Paspalakis, Phys. Rev. A 102, 023715 (2020).

Quantum 2020

Stimulated Raman adiabatic passage shortcuts with dissipation and dephasing

ornstein-ulhenbeck noise

dissipation

superadiabatic stirap

shortcuts to adiabaticity

stirap

quantum control

dephasing

**WELCOME TO THE 2021 CAP VIRTUAL CONGRESS UNDERLINE PLATFORM**

The CAP staff and our organizing and program committees are pleased to welcome you to our 2021 Congress filled with plenary talks, technical sessions/talks, student presentations and competition sessions, workshops, and several symposia offered by the CAP divisions and its partners.  

You will also have opportunities to network with other delegates through the Gathertown platform accessed by selecting the lounge or posters button on the left.

Registered delegates should use the schedule button to call up the details of the session/event they wish to attend.  Each sessions includes a link to access the online platform where the event is taking place, either within Underline or through other Congress-related Zoom meetings.  

Invited speaker talks are identified with an (I), and student competitors include a (G*) or (U*) to identify graduate or undergraduate presenters.

Please take the time to check out the information about our sponsors and exhibitors, request further information, or leave a note of thanks for their support.

General information about the Congress can be found on the CAP website Congress pages at https://www.cap.ca/congress/2021.

Looking for a specific talk?   A full searchable list is available on our Indico Congress site at https://indico.cern.ch/event/985448/contributions/

We look forward to sharing this exciting week with you!


CAP Virtual Congress 2021

poster

The Institute of Physics and IOP Publishing, in partnership with the Chinese Physical Society (CPS) and the University of Science and Technology of China (USTC) are proud to have brought together the international quantum science community online for this inaugural conference.


Early career and leading researchers from universities, industry and government worldwide came together to share, learn and collaborate on the latest research and emerging areas of high interest across quantum science and technology. The broad themes covered by Quantum 2020 included:

Quantum communication;
Quantum computing and quantum simulation;
Quantum sensing, metrology and imaging;
Quantum information theory, software and algorithms;
Quantum foundations;
Quantum technology in industry.
The four-day event featured talks from world-renowned scientists, interactive poster sessions and two exciting panel discussions on the themes of Quantum Technology in Industry and Quantum Technology Programmes Around the World.


You will need to [register](https://www.iopconferences.org/iop/frontend/reg/tRegisterEmailNew.csp?pageID=978403&eventID=1552&tempPersonID=536224) to obtain a ticket. . If you have already registered you should have been sent an email from Underline (to the email address that you registered with) with the subject line ‘Welcome to Quantum 2020’. This email includes your ticket for the event. 

If you have a ticket and are experiencing problems in accessing the event, please contact us. 

The Institute of Physics and IOP Publishing, in partnership with the Chinese Physical Society (CPS) and the University of Science and Technology of China (USTC) are proud to have brought together the international quantum science community online for this inaugural conference.

Early career and leading researchers from universities, industry and government worldwide came together to share, learn and collaborate on the latest research and emerging areas of high interest across quantum science and technology. 

The study of hybrid semiconductor quantum dot (SQD) and metal nanoparticle (MNP) structures has attracted significant interest in recent years, as the hybrid structures have enhanced optical response in comparison to their constituents [1]. A problem that has been studied is the controlled exciton dynamics of the SQD in the presence of the MNP (see Refs. [2,3] and references therein). Insofar, the study of the controlled exciton dynamics in hybrid SQD-MNP structures is limited to symmetric SQDs. Asymmetric SQDs possess permanent dipole moments which may strongly affect their interaction with light. In this work we study the controlled exciton dynamics of hybrid asymmetric SQD-MNP structures and pay special attention to the case that the asymmetric SQD has permanent electric dipoles that take values comparable to the induced electric dipoles. We analyze the exciton dynamics for different electromagnetic pulse durations and different distances between the SQD and the MNP and present cases where high efficiency excitonic population inversion is succeeded. 
1. B. Szychowski, M. Pelton, and M. C. Daniel, Nanophot. 8, 517 (2019). 
2. E. Paspalakis, S. Evangelou, and A. F. Terzis, Phys. Rev. B 87, 235302 (2013).
3. Y. Qi et al, J. Phys. D: Appl. Phys. 52 425101 (2019).

Control of excitonic population dynamics in a coupled asymmetric semiconductor quantum dot - metal nanoparticle structure

Geometry structure optimizations and NBO-analysis of the electron density distributionfor hemi- (hp) and dicarbahemiporphyrazine (dchp) complexes with Ca(II), Ni(II) and Zn(II) were performed at PBE0/pcseg-2 level of theory. The Time Dependent DFT spectra were calculated for this molecules

Features of the electron density distribution in the complexes of hemi- and dicarbahemiporphyrazine with Ca(II), Ni(II) and Zn(II)

The power of a quantum circuit is determined through the number of two-qubit entangling gates that can be performed within the coherence time of the system. In the absence of parallel quantum gate operations, this would make the quantum simulators limited to shallow circuits. Here, we propose a protocol to parallelize the
implementation of two-qubit entangling gates between multiple users which are spatially separated and use a commonly sheared spin chain data-bus. Our protocol works through inducing effective interaction between each pair of qubits without disturbing the others, therefore, it increases the rate of gate operations without creating crosstalk. This is achieved by tuning the Hamiltonian parameters appropriately, described in the form of two different strategies. The tuning of the parameters makes different bilocalized eigenstates responsible for the realization of the entangling gates between different pairs of distant qubits. Remarkably, the performance of our protocol is robust against increasing the length of the data-bus and the number of users. Moreover, we show that
this protocol can accomplish two-way communication and standout the decoherence effects.

Parallel entangling gate operations in spin chins

The preparation of a high-quality single-photon source at the mid-infrared (MIR) wavelength range (approximately 2-20 µm) is of great importance for the next-generation technology of quantum sensing, imaging, and communications. The current research on single-photon sources mainly focuses on the near-infrared band. The high-brightness, spectrally pure, and easy-to-operate quantum photon source at the MIR range remains an unsettled problem. To solve this problem, we design a scheme based on a machine learning framework to optimize the poling period of LN crystal at the MIR range. Calculation results show that the spectral purity of the heralded single photons can over 0.999 for such a custom poled LN (cpLN). This high-quality source could be very useful for applications in quantum sensing, imaging, and communications at the MIR band.

Mid-infrared spectrally pure photons generation from LN optimized by machine learning

The mid-infrared (MIR) wavelength range (approximately 2-20 μm) is of great interest to a variety of applications. However, the advantages of the MIR range have not been fully exploited using quantum technology. It is still lack of high-quality quantum sources for the MIR range. In this work, we theoretically study the preparation of pure-state single-photon source from 23 nonlinear optical crystals, including birefringent crystals CMTC, LIIO3, AAS, HGS, CGA, TAS, AGS, AGSE, GASE, LIS, LISE, LGS, and LGSE; periodic poling crystals LT, LN, KTP, KN, CSP, ZGP, BATIO3, MGBAF4, OP-ZNSE, and PMN-0.38PT. Calculation results show that these crystals satisfy three kinds of group-velocity-matching (GVM) conditions. The down-converted photons wavelength range is from 1298 to 7384 nm for the GVM1 condition, from 2312 to 11650 nm for the GVM2 condition, and from 1658 to 9380 nm for the GVM3 condition. The spectral purities for three kinds of GVM conditions are around 0.97, 0.97, and 0.82, respectively. We also calculate their performance in the Hong-Ou-Mandel interference from independent sources, and it can also achieve visibility as high as 97%. This study may provide high-quality heralded single-photon sources and entangled photon sources for quantum sensing, imaging, and communications at the MIR wavelength range.

Mid-infrared spectrally-pure single-photon states generation from 23 nonlinear optical crystals

We theoretically investigate the preparation of spectrally-uncorrelated biphotons from a spontaneous parametric down-conversion process using doped PPLN crystals, including MgO, ZnO, and In2O3 doped PPLN with a doping ratio from 0 to 7 mol%. Calculation results show that these crystals satisfy three kinds of group-velocity-matching (GVM) conditions at mid-infrared (MIR) wavelengths. Under the GVM1, GVM2, and GVM3 conditions, the wavelengths are at around 2.5μm, 4.0μm, and 3.2μm, and the corresponding spectral purities are around 0.97, 0.97, and 0.82, respectively. We also calculate the thermal properties of the doped PPLN crystals and their performance in Hong-Ou-Mandel interference. It can be concluded that the doping ratio can be utilized as a degree of freedom to manipulate the biphoton state. The spectrally uncorrelated biphotons can be used to prepare pure single-photon source and entangled photon source, which may have promising applications for quantum-enhanced sensing, imaging, and communications at the MIR range.

Mid-infrared spectrally-uncorrelated biphotons generation from doped PPLN

The orbital angular momentum (OAM) is an important degree of freedom for photons because the OAM state can be utilized as a high dimensional information carrier for large-capacity quantum communications. How to recognizing a single -photon-level OAM state with high accuracy in a noisy environment is a very important problem in this scenario. In this research, we use a convolutional neural 
network (CNN) technique to recognize the Laguerre-Gaussian (LG) modes at the single-photon level. Simulation and experimental results show that with the help of deep learning techniques, recognizing accuracy can be greatly improved. This study may shed new light on the OAM based quantum sensing and quantum communications in the future.

Recognizing the OAM state of a single photon using deep learning technique

Metal porphyrazines (Pz) and their analogies for example tetrathiadiazoporphyrazines (TTDDPz) attracted attention due to successful application of these compounds in different field. 
Simulation of the  electronic spectra were carried out  on the base of calculations by TTDFT method using functional B3LYP with pcseg-2 basis set.
 Analyzing the simulated electronic spectra of molecules of the form MClPz and MClTTDPz, we can observe a unsplit Q-band, which is explained by the degeneracy of LUMO and an increase in the symmetry of metalloporphyrazines to D4h relative to their protonated analogs with D2h symmetry. Thus, the molecules under consideration correspond to the Gouterman four-orbital model.
The maximum of the Q-band for MClPz molecules is in the region with a wavelength of 509-511 nm, while for MClTTDPz it is located in the region of 582-590 nm. This can be explained by the influence of the electron-withdrawing substituent (thiadiazole).

Simulation of molecular spectrums of MeClPz and MeClTTDPZ (Me=La, Lu, Y)

Continuous-time quantum computation is a method for solving computational problems that uses qubits which evolve according to a continuous-time Hamiltonian. Adiabatic quantum computing and continuous-time quantum walks are both forms of continuous-time quantum computing which have been found to be especially useful for solving optimization problems. We apply these methods of computation to an optimization problem known as the maximum-2-satisfiability problem (MAX 2-SAT). Although being NP-complete, modern classical algorithms for MAX 2-SAT have been refined to the extent that they are very effective in practice. We explore how the hardness of MAX 2-SAT instances differs for a classical algorithm and the two quantum algorithms. The results we obtain for quantum walks follow what was found previously for the problem of finding spin glass ground states, indicating that there is nothing special about the spin glass problem. We discuss a technique for producing a faster quantum algorithm using rapid quenches [see Callison et al poster & arXiv:2007.11599]. Although the classical algorithm still performs better in this case, there is potential for further improvements that could be made to the quantum algorithms.

Comparing Quantum and Classical Algorithms for MAX 2-SAT

Like their classical counterparts, today’s quantum computers are also easily affected by errors. It is crucial to develop error correction procedures to reduce the effects of the noise in the system. However, the current mainstream error correction codes, like the surface code and toric code, often require a large number of physical qubits, which is not feasible on the NISQ (noisy intermediate-scale quantum) devices where the number of available qubits is limited (< 100 qubits). This work proposed a variational quantum circuit based scheme to discover device-specific error correction codes for the NISQ computing systems in which the encode and recovery (syndrome) layers of our error correction circuit are trained together. Various choices of local optimizers are explored, and performances were compared with each other. We adopted shallow and simple-structured circuits in both encode and recovery layers to alleviate the barren plateau problem in the training of parameterized quantum circuits. The error correction circuit was trained against different kinds of error models, including depolarizing, phase and amplitude damping errors. We adopted a stronger loss constraint. We adopted a stronger loss constraint which, unlike previous attempts, enabled the error correction circuit to achieve higher fidelity on the encoding qubits.

Premium content

Next from Quantum 2020

Control of excitonic population dynamics in a coupled asymmetric semiconductor quantum dot - metal nanoparticle structure

Similar lecture

Quantum Control of Trapped Ions using Stimulated Raman Adiabatic Passage